WiFi Extender |300Mbps Wireless-N AP Range Signal Extender Booster | Designed in the USA 802.11 Wifi Repeater
WiFi Extender |300Mbps Wireless-N AP Range Signal Extender Booster | Designed in the USA 802.11 Wifi Repeater
Luckily for you, we can help you by our 300Mbps Wi-Fi Range Extender. Thanks to the convenient and unique design now you can easily use this wifi booster
that plugs into the wall and save your space from unnecessary power cables and device clutters. No need changes in the settings in the router, it will take you only a few minutes to install this extender.
Description
- The WiFi Repeater, also called range extender is used to broaden range of a
- wifi network. A wifi repeater works by receiving the Wifi signal from a router and
- then amplify and rebroadcast it around locally. With a wifi repeater Computers and
- printers that located out of the original range of access point can access the extended
- wifi network. Wifi repeater effectively doubles the coverage area of your existing Wifi
- network, extend your network to the far end of your home or office, you just need to
- place it half way between the computers and router.
Features
- Improves wireless coverage in all WLAN networks
- WLAN 802.11n for wireless high-speed access
- Downward compatible with 802.11g(54Mbit/s) and 802.11b standard(11Mbit/s)
- Support 2.4GHz WLAN networks
- Maximum WLAN security with WPA2, WPA and WEP(128/64)
- Software wizard for simple setup
- Antennas integrated
Specifications
- Ports:1 x RJ45 ,
- Button:Reset WPS
- LED:1x LAN, 1 x WLAN, 1 x Power,1 x WPS,
- Chipset:RTL8196C
- Flash:16Mbps
- SDRAM:128Mbps
- Power Supply:Internal DC5V / 1A
- Power Plug:EU/US (option)
- Power Consumption:2.3W
- Rated Voltage/ requency /current:100-240 Va.c. 50/60Hz, 0.1A Max ,
Requirements
- 110 ~ 230-volt socket
- The WLAN client must support at least the WPA encryption standard.
- WLAN access point and the WLAN client with automatic IP address assignment (DHCP)
- Forwarding of IPv4-based protocols/Address Resolution Protocol
- The network name (SSID) of the WLAN access point must be set to "visible".
- WLAN access point/client according to IEEE 802.11n, g, b.
Package Content
- 1 x Wireless-N Repeater(WE have EU/US plug to choose)
- 1 x RJ-45 Networking Cable
- 1 x Quick Installation
WiFi Extender |
Comments
Post a Comment